Skip to content

Supply chain and resilience

Fabs, Substrates, Packaging and Chokepoints

Semiconductor availability is not one industry. It is a chain with several narrow places.

4 min read

When semiconductor supply is discussed, the picture is usually a fab: a cleanroom, a wafer, a very large machine. That picture is accurate and incomplete, and the incompleteness is where most of the surprises come from.

A finished component passes through several industries before it reaches a reel. Each of them has its own capacity, its own geography and its own constraints.

As of November 2026, the policy facts in this note reflect published European Commission material. Industrial policy in this area is moving quickly, so treat specific programmes and figures as dated rather than permanent.

The position. Availability is decided by the narrowest stage in a chain, not by the most famous one. Wafer fabrication is one stage. Substrates, assembly, test, specialised materials and logistics are others, and several of them are more concentrated than fabrication is.

The stages between sand and a reel

StageWhat happensWhy it can be the constraint
Wafer fabricationTransistors are madeCapacity is node specific and takes years to add
Specialised materialsPhotoresists, gases, substratesFew qualified suppliers, long qualification cycles
Substrate and packagingThe die is connected to the outside worldHighly concentrated, and advanced packaging more so
Assembly and testDevices are finished and screenedOften subcontracted, often in one region
DistributionDevices reach buyersAllocation decisions are made here
LogisticsGoods moveRoutes and chokepoints, as the previous notes covered

A shortage can originate at any of these. The visible symptom is identical in each case, which is why "the fabs are full" is both a common explanation and frequently the wrong one.

Why policy attention is on this

The European Chips Act is a useful public example of how states treat this as industrial infrastructure. Its published objectives include strengthening research and technological leadership, reinforcing capacity in design, manufacturing and packaging, increasing production by 2030, addressing the skills shortage, and developing an in-depth understanding of global semiconductor supply chains.

Note the third and the fifth. Packaging is named alongside manufacturing, and understanding the chain is an objective in itself. The Act's third pillar covers monitoring and crisis response, with a European Semiconductor Board that maps and monitors the value chain and works on prevention and response to semiconductor crises. The Commission's page records 19 State aid decisions for first-of-a-kind facilities, representing over EUR 33 billion in public and private investment.

Those are facts about policy, not predictions about supply. They are included here because they show which stages are considered strategic, which is a better guide than a news cycle.

What this means for a design

The practical translation for a hardware team is a short list of questions:

  • Which of our parts come from a process node or a package type with few

suppliers?

  • Which of our parts share a packaging or test subcontractor, even across

different manufacturers?

  • Which functions in our design have no alternative that uses a different

chain?

  • Which of our products would be affected at once if one of those stages

constrained?

Only the last question is answerable from your own records, and it is the one that decides what you do in the first week of a constraint.

What a good hardware team should know

  • Do not model the supply chain as suppliers. Model it as stages. Two

suppliers, one packaging subcontractor, is one dependency.

  • Advanced packaging is a real constraint, not a detail. It is named

explicitly in policy for a reason.

  • Avoid forecasting. Nobody needs a prediction about next year to decide

that a single-chain function is worth a second option.

  • Date every external fact you record. Lifecycle status, allocation

behaviour and supplier geography all change.

Where structured engineering data helps

Everything upstream of your BOM is outside your systems. What is inside them is the exposure map: which products, at which released revisions, depend on which parts. XKEMA records those relationships, which is what turns a constraint announcement into a specific list of affected products.

XKEMA does not monitor fabs, allocation, lifecycle or stock, and nothing in this note should be read as a claim that it does.

Sources

Where to go next

¿Te ha resultado útil?

Reddit LinkedIn

The XKEMA newsletter

Hardware engineering worth keeping

New courses, engineering notes and hardware guides, whenever there is something genuinely worth reading. Nothing else.

We will email you to confirm. You can unsubscribe from any issue.

XKEMA, in one sentence

Engineering knowledge management software for companies that develop electronic products: the product structure, its bills of materials, its documentation and its revisions, all in one place.